C400zy Truck Mounted Water Well Drilling Rig Work with Air Compressor or Mud Pump

C400zy Truck Mounted Water Well Drilling Rig Work with Air Compressor or Mud Pump

C400ZY truck mounted water properly drilling rig/operate with CZPT or mud pump
 

 

Principal features:

C400ZY truck mounted drilling rig is designed by our engineers it adopts truck mounted and is a rotary drilling rig.

The truck chassis adopts the 6X4 particular crane chassis of brand name SINOTRUK, the principal transmit, transmission electrical power, gearbox, sets of windlass, mud pump, sewage pump,mast are setup on the chassis.

This rig is a rotary drilling rig with directional circulation, which is outfitted with BW850/2A mud pump, It adopts the slurry as the washing fluid, it can drill on clay, sand and rock if it is equipped with a good drilling little bit.

The electrical power of drilling rig will come from the truck engine, the rig sets up distribute employ and hydraulic method.

We can set up the spare electrical engine and clutch implement in accordance to client’s requirement, so that the rig can operate with diesel motor or electric powered engine.

We can established up a generator (15kw) , so that it is comfort to illuminate or work at night time.

The introducing force apply is hydraulic, so it has a large effectiveness when the rig drill on mud rock and weathering development through utilizing the incorporating strain put into action.

The master driving of rig is mechanical, the four jacks and mast are hydraulic operated. Distribute box, sewage pump, master driving clutch method are air operated.

The appearance of rig is quite, it has a large performance simply because of possessing a greater torque of the turntable, it is mainly employed for water well, design, national protection creating foundation, geological exploration, geothermic nicely and other basis working, it is well-known with domestic and foreign clients.

 

CZPT Parameter
  

CZPT parameter
Drilling depth(M) 80 four hundred
Drilling diameter(mm) 1500 five hundred
Velocity of turntable(r/min) 21.23663.2100.615520.two(reverse)
Torque of turntable(KN.m) 1810.663.82.518.nine(reverse)
Solitary rope lifting capability of primary windlass(KN) forty five
The capacity of primary windlass(KN) 270
Single rope lifting ability of hydraulic windlass(KN) forty
The ability of hydraulic windlass(KN) 160
The lifting ability of hook(KN) 270
Bearing capacity of mast (KN) 270
The height of mast (mm) 11500
Bearing potential (t) thirty
Pipe Kelly (mm) 108×108×7500
Assistant pipe (mm) Ф89×10×5500
CZPT pump Product CB-HP80/40
Pump shipping and delivery (ml/r) 80/40
Rated velocity (r/min) 2000
Rated pressure(MPa) 20
BW850/2A plunger pump Diameter of cylinder (mm) 150
Stroke of piston (mm) 180
Idea of stream (L / min) 600 850
Rated strain (Mpa) 3 two
Pounding instances (min-one) 58 eighty two
Diameter of suction tube (mm) 127
Diameter of drain pipe (mm) 64
Input pace (r / min) 470
Enter electricity (kw) forty
All round proportions (mm) 2000*1030*1400
Fat (t) one.five
Truck chassis Design TAZ5183TZJ
CZPT type 6×4
Engine CA6DE3-20E3(CZPTe III emission CZPT)
147
2300
Measurement (L*W*H)(mm) 11110×2490×2500
CZPTtric generator Design MF
Rated power (kw) 15
Rated voltage(v) four hundred
Rated present(A) 27
Pace (r/min) 1500
Frequency(Hz) 50
CZPT level IP21
Insulation Class H
The best working gear (or velocity) fifth equipment(a thousand-1400r/min)
The optimum pace(Km/h) seventy five
Fat (kg) 19340
Transportation size(L*W*H)(mm) 12160*2490*3440
Doing work dimension(L*W*H)(mm) 11110*2490*13110

 

Associated CZPT

Organization Profile

 

Glorytek CZPT (ZheJiang ) Co., Ltd. is an built-in corporation specialized in producing and exporting leading quality drilling gear and drilling components for far more than 20 many years. We are supported and assisted by hugely seasoned R&D staff and enginners that empower us to comprehensive all the assigned projects successfully as for each clients’ demands.

Our factory addresses an spot of 250,000 sq. meters, design location is about a hundred and fifty,000 square meters, getting machining machinery, CNC processing heart, friction welding device, tests equipments and many others. over two hundred sets and a lot more than 600 employees.

Our merchandise have been exported a lot more than sixty countries, including Australia, Russia, Soutn Africa, Zimbabwe, Malaysia, Indonesia, South Korea, France, Sweden, United states, Canada, Haiti and many others.

 

FAQ

Q: How can we decide on a ideal water well drill rig?
A: We typically recommend a suitable product in accordance to drilling depth, drilling gap dia. and layer problem on internet site.
 

Q: Are you a manufacturing facility or a buying and selling firm ?
A: We are an built-in company specialized in producing and exporting.

Q: What is your payment conditions?
A: We can accept T/T,L/C.

Q:.What is your MOQ? How lengthy is the shipping time?
A: Our MOQ is 1 sets. Generally for drill rig, the delivery time is about twenty five-thirty days soon after acquiring payment, the drilling instruments would be about 15 times.

Q:. How lengthy is the warranty?
A: The ensure interval for mainframe is one particular yr (excluding the quick wear elements).

Q: Can we print my Symbol on the merchandise?
A: Yes, we can. We assistance OEM .
 

C400zy Truck Mounted Water Well Drilling Rig Work with Air Compressor or Mud Pump